General Category > ABS related issues

Servo activates when connected to GS 911?

<< < (2/2)

dimdazzling:

--- Quote from: JayGS on May 22, 2022, 09:44:09 PM ---I took apart the ABS module last night. It was pretty clean on the inside for the most part. all the internal o-rings and filters were were in good shape. The only part I didn't tamper with were the motors at the base of the module because I believe those are part of the control circuit and that system is showing no faults. I sprayed the crap out of the pressure sensor for the wheel circuit with electric cleaner and compressed air. The sensor itself did have some gunk on it on one corner that had hardened and appeared to bridge the small space between the pressure plate and the housing. I was hopeful that was the problem since I didn't find any other potential problems. The passage to the sensor was unobstructed and cleaned.

I put it all back together today and still showing high pressure(120 bar) in the front wheel circuit!! I guess it has to be a faulty sensor. Anything else I should try before gambling on a used ABS unit if I can find one?

--- End quote ---
Is it a bug you can fix yourself?

Navigation

[0] Message Index

[*] Previous page