General Category > Technical

Problems connecting to a R1200RT??

<< < (2/2)

Ruan:
Hi All

Just to add here, the bikes with two connectors (e.g. K1600 for topbox connector and RTs), is listed in our FAQ below:
https://www.hexcode.co.za/products/gs-911/support/how-tos/how-to-loacate-the-diagnostic-connector-on-your-bmw-motorcycle

Regarding the Euro 4 models, some countries only received their 2016 models in 2017, so this bridging period is difficult to state it is going to be an OBD-II connector if it was bought in 2017. The best practice would be the above FAQ and our VIN decoder below:
https://www.hexinnovate.com/vin-decoder/

Bonus info :) the C-Evolution scooter from 2018+ still has the 10-pin round connector.

Kind regards
Ruan

Randyjaco:
Mine has the round 10 pin, but when plugged in to the GS9,11 it would not work. Only the oblong one worked when I finally got the adapter.

Ruan:
Hi Randyjaco

Yes, the 10-pin connector on that bike is not designed for diagnostic purposes, it is simply used for heated seats if I recall on the RTs.

Kind regards
Ruan

Jughead:
On the RT the round connector is for the optional radio/speaker harness.

sakm:
I have a 2016 RT and there is no round connector in for diagnostics there is only an oblong one

The only round one is under the rear seat which is for the brake light and central locking for the top box

Navigation

[0] Message Index

[*] Previous page