General Category > General Discussion
Problem with cooling system S1000RR
jakutash:
Maybe some one can read my logs from GS911 abot temp rising
Jughead:
Jakutash
From your logs, your thermostat appears to be working. Unfortunately your log starts a little late, but you do catch it right as it starts opening. You can see that from the "Coolant Temp" column.
At time 2087 (row 9) the temp is 90°. The temp then drops off to 89.3° at time 20997 (row 18) and then starts climbing again. This is when the thermostat opens.
It is a sealed system, so the fans should only kick in at around 105°, at which point the temp should start dropping off to about 95°, where the fans will stop.
jakutash:
--- Quote from: Jughead on September 27, 2021, 03:42:21 PM ---Jakutash
From your logs, your thermostat appears to be working. Unfortunately your log starts a little late, but you do catch it right as it starts opening. You can see that from the "Coolant Temp" column.
At time 2087 (row 9) the temp is 90°. The temp then drops off to 89.3° at time 20997 (row 18) and then starts climbing again. This is when the thermostat opens.
It is a sealed system, so the fans should only kick in at around 105°, at which point the temp should start dropping off to about 95°, where the fans will stop.
--- End quote ---
Thank you very much for comment. I did not show the whole picture, unfortunately, at 90 degrees I slightly accelerated... after the temperature reached 105 degrees, it did not go down, it lingered a little and went further up, this worries me.
Desmondtully:
I don't really see a problem with this. It's more like a recreation rather than plagiarism. You know, imitation is the sincerest form of flattery and all that.
Kogeltje:
I also had some cooling issues last year.
Replaced the Coolant and bleeded all the air.
Make sure you bleed Out all the air from the system.
Turns out my radiator cap was broken. Replaced That and No issues anymore.
Brentuning also adjusted the fan temp to 85celcius. So the bike runs cooler.
It would be a great feature to set the fan temp with the GS-911.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version