Author Topic: error code 21F900  (Read 5237 times)

rzvnz

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
error code 21F900
« on: October 04, 2020, 11:04:28 PM »
I've got an unknown permanent error code in my S1000R 2014: 21F900.
Anybody has a clue?

GS Jim

  • Full Member
  • ***
  • Posts: 223
  • Karma: +9/-0
Re: error code 21F900
« Reply #1 on: October 05, 2020, 03:25:04 AM »
It could possibly be this:

21F900   Throttle valve contamination   x_bmsx   Engine control

Fault Code Description
DME detects increased need of the throttle valve during idling.
Due to the fuel grade, contamination of the throttle valve/throttle valves has occurred.
Service Plan
Cleaning of the throttle valve/throttle valves
Fault Impact
Rough engine running possible.
Engine stalls.
Warnings
Warning Lights   
Engine warning lamp on.
Control Center Messages   
Service Notes
After rectifying the fault, reset the mixture preparation adaption values.


Francois Barnard

  • Administrator
  • Sr. Member
  • *****
  • Posts: 273
  • Karma: +2/-0
    • HEX Innovate
Re: error code 21F900
« Reply #2 on: October 08, 2020, 11:51:48 AM »
Hi rzvnz,

Here is a link where you can always get more info on fault codes when the GS-911 description is not enough/incomplete: https://bmwfault.codes/XMLDiagView?doc=MgAwADAAMAAwADMAOAA0ADAANwAzADgANwAzADAANAA=

Kind regards,
Francois

NH1200c

  • Newbie
  • *
  • Posts: 10
  • Karma: +3/-0
Re: error code 21F900
« Reply #3 on: October 08, 2020, 09:11:37 PM »
Hi Francois,

I'm brand new to the GS-911 and appreciate the link to the Fault Codes.

Regards,
Larry
Larry
BMW R1250RT
GS-911 & ezCAN

Francois Barnard

  • Administrator
  • Sr. Member
  • *****
  • Posts: 273
  • Karma: +2/-0
    • HEX Innovate
Re: error code 21F900
« Reply #4 on: October 09, 2020, 07:50:01 AM »
Hi Francois,

I'm brand new to the GS-911 and appreciate the link to the Fault Codes.

Regards,
Larry

Hi Larry,

It is a great pleasure. We aim to always have up to date descriptions for the fault codes, but there are some of the thousands that we've never seen before!
In that case bmwfault.codes is a great resource ;)

Kind regards,
Francois

NH1200c

  • Newbie
  • *
  • Posts: 10
  • Karma: +3/-0
Re: error code 21F900
« Reply #5 on: October 09, 2020, 11:45:04 AM »
I'm currently in a great position, as my bike is new and running very well. Our 2020 riding season is drawing to a close (temp this morning 34F/1C) and I have been reading new (and old) threads to try and learn something from all of you more experienced folks. What symptoms were noticed on a ride, what was found with troubleshooting, etc.

Of course it's always more fun to troubleshoot when you're not standing beside your bike on a lonely road with limited tools and no cell service. I hope that my memory will be able to store just a few of the tips away for that future day should it be me or someone I can help along the road.

Best regards,
Larry
Larry
BMW R1250RT
GS-911 & ezCAN

mariahcarey

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Re: error code 21F900
« Reply #6 on: March 06, 2023, 09:26:22 AM »
Error code 21F900 on the BMW S1000R 2014 refers to a fault in the ABS pressure sensor. The sensor is located in the ABS hydraulic unit and measures the brake fluid pressure in the hydraulic system.

If you are experiencing this error code, it is recommended that you take your motorcycle to a certified BMW technician to diagnose and repair the issue. They may need to inspect the ABS hydraulic unit and pressure sensor to determine the cause of the fault and replace any damaged components as necessary. It is important to address any ABS faults as soon as possible, as they can affect the safety and performance of your motorcycle.

schuppi

  • Hero Member
  • *****
  • Posts: 552
  • Karma: +21/-0
Re: error code 21F900
« Reply #7 on: March 06, 2023, 11:11:58 PM »
mariahcarey wrote:
"Error code 21F900 on the BMW S1000R 2014 refers to a fault in the ABS pressure sensor"

Never, please check your informations!

21F900
DME detects increased need of the throttle valve during idling.
Due to the fuel grade, contamination of the throttle valve/throttle valves has occurred.

Schönen Tag
Wolfgang
                                       talk less, drive more

Borgia

  • Jr. Member
  • **
  • Posts: 60
  • Karma: +1/-0
Re: error code 21F900
« Reply #8 on: March 07, 2023, 08:00:06 AM »
Schuppi I think that you just responded to a spammer who generated his post using ChatGPT.
Hey BMW: No service manual = no new bike.

schuppi

  • Hero Member
  • *****
  • Posts: 552
  • Karma: +21/-0
Re: error code 21F900
« Reply #9 on: March 07, 2023, 09:26:51 PM »
good, thanks for that
I will reconsider my next answers
Schönen Tag
Wolfgang
                                       talk less, drive more