General Category > ezCAN
New feature requests for ezCAN ?
StephanT:
you should have a notification
abdullah:
--- Quote from: StephanT on August 26, 2020, 05:59:16 PM ---thanks for the feedback!
--- Quote from: abdullah on August 26, 2020, 07:11:20 AM ---also i would like to request to
1) make new configuration profile for more light if bike for examle have 3 pair
--- End quote ---
why would you require 3 or more pairs of lights controlled separately... nothing stops you from making all four channels Aux Lights - could be a combo of AUX 1 and AUX 2 or all AUX 1 or all AUX2
--- Quote from: abdullah on August 26, 2020, 07:11:20 AM ---2) make a muliple daisy chained unitd able to talk to each other for upgrading / configuration / etc
--- End quote ---
that's not possible in the current version as each ezCAN is configured through USB... but... if you have a Bluetooth app, it might be set up to talk to all the ezCANs you have...
--- Quote from: abdullah on August 26, 2020, 07:11:20 AM ---3) able to configure voltage to variable voltage for some accessories use 5v such as usb, 7.2v or 9v for heated gear
--- End quote ---
The ezCAN only switches the bike's battery voltage.. but that's what the accessory output is for.. there are a gazillion and one 12v to USB converters available..
you mention specifically for heated gear... I'm pretty sure all heated gear works off the bikes 12V supply, except the ones that work off LiPo battery packs... I'm still confused what the 7.2V and 9V would be used for - could you elaborate or show us examples / links of such products?
--- Quote from: abdullah on August 26, 2020, 07:11:20 AM ---4) able to control heated gear power but i am not sure if this feture can be done throw mobile app
--- End quote ---
this is almost available ;D the next version Public release for ezCAN supports Heated Gear. Subscribe to our newsletter on the hexezcan.com and get a. notification as soon as new features are released!
best
Stephan
--- End quote ---
i need it based on our country regulations for example you can't turn spot beam light on street only on offroad where i use denali DR1 on top position, also i have denali d7 in middle possition with yellow cover for fog and dust, and d2 in fork mount where its always run
thats why i need 3 set of light for me
i would like to request thing if possible rather that make it hardwairing and relay if you can set 2 pair for examle DR1 and D7 in XOR relation if DR1 on D7 go off and vise versa
also i would like to see some think may be no one has try i saw authroity bmw have special switches that can be ordered online if you can emblement an configuration for them its will be very nice to have dedicated switches
i know some time i am looking for complex solutions ;D
StephanT:
--- Quote from: abdullah on August 28, 2020, 06:27:43 AM ---i need it based on our country regulations for example you can't turn spot beam light on street only on offroad where i use denali DR1 on top position, also i have denali d7 in middle possition with yellow cover for fog and dust, and d2 in fork mount where its always run
i would like to request thing if possible rather that make it hardwairing and relay if you can set 2 pair for examle DR1 and D7 in XOR relation if DR1 on D7 go off and vise versa
--- End quote ---
Ok, so let's brake this down a little - you have
DR1 on the top
D7 in the middel
D2 on the fork
According to the country regulations, which may and may not be ON and OFF when?
a) I woud like to understand the specific regulation and
b) maybe we can get away with AUX1 and AUX2 only,
For instance, could the D2's on the forks not be ON all the time? then we could drive them from an normal ACCESSORY output
--- Quote from: abdullah on August 28, 2020, 06:27:43 AM ---also i would like to see some think may be no one has try i saw authroity bmw have special switches that can be ordered online if you can emblement an configuration for them its will be very nice to have dedicated switches
--- End quote ---
Hmmm - that could be interesting - maybe you could source us a set and we can try them out - that would be very helpful!
best
Stephan
abdullah:
--- Quote from: StephanT on August 28, 2020, 02:58:55 PM ---
--- Quote from: abdullah on August 28, 2020, 06:27:43 AM ---i need it based on our country regulations for example you can't turn spot beam light on street only on offroad where i use denali DR1 on top position, also i have denali d7 in middle possition with yellow cover for fog and dust, and d2 in fork mount where its always run
i would like to request thing if possible rather that make it hardwairing and relay if you can set 2 pair for examle DR1 and D7 in XOR relation if DR1 on D7 go off and vise versa
--- End quote ---
Ok, so let's brake this down a little - you have
DR1 on the top
D7 in the middel
D2 on the fork
According to the country regulations, which may and may not be ON and OFF when?
a) I woud like to understand the specific regulation and
b) maybe we can get away with AUX1 and AUX2 only,
For instance, could the D2's on the forks not be ON all the time? then we could drive them from an normal ACCESSORY output
--- Quote from: abdullah on August 28, 2020, 06:27:43 AM ---also i would like to see some think may be no one has try i saw authroity bmw have special switches that can be ordered online if you can emblement an configuration for them its will be very nice to have dedicated switches
--- End quote ---
Hmmm - that could be interesting - maybe you could source us a set and we can try them out - that would be very helpful!
best
Stephan
--- End quote ---
regarding requlation in my country any spot beam in high position such as near headligh are not allowed for street only for offroad use because its can blind the oposit side traffic
but for middle possision where its mounted in lower crashbar its allowed where high beam is considered low beam and its legally to use it on street
i will try to found rules and regulation of traffic department in my country web site and i will try to share it
also regarding authoriy aux switches this its page https://www.bmw-motorrad-authorities.com/en-EN/accessories/57/the-bmw-f-750-gs-p
also check https://www.realoem.com/bmw/enUS/showparts?id=0B08-EUR-07-2019-K80-BMW-F_750_GS_0B08,_0B18_&diagId=61_5746 for part details
and its avilable for r1200rt-p r1250rt-p f850gs-p g750gs-p thats models from BMW and i will check with my dealer if they avilable to purchase by public or indeveduals
best regards
StephanT:
--- Quote from: abdullah on August 28, 2020, 03:31:44 PM ---regarding requlation in my country any spot beam in high position such as near headligh are not allowed for street only for offroad use because its can blind the oposit side traffic
--- End quote ---
roger that
I'm just unsure exactly what you're saying here...
--- Quote from: abdullah on August 28, 2020, 03:31:44 PM ---but for middle possision where its mounted in lower crashbar its allowed where high beam is considered low beam and its legally to use it on street
--- End quote ---
If the spots are in the middle position then they can be ON when HIGH beams are ON, but must be OFF when High beam is OFF... am I understanding this correctly?
--- Quote from: abdullah on August 28, 2020, 03:31:44 PM ---also regarding authoriy aux switches this its page https://www.bmw-motorrad-authorities.com/en-EN/accessories/57/the-bmw-f-750-gs-p
also check https://www.realoem.com/bmw/enUS/showparts?id=0B08-EUR-07-2019-K80-BMW-F_750_GS_0B08,_0B18_&diagId=61_5746 for part details
--- End quote ---
thanks, yes, I've seen the Authority Switches before - not sure we can buy them, but worth checking out...
--- Quote from: abdullah on August 28, 2020, 03:31:44 PM ---and its avilable for r1200rt-p r1250rt-p f850gs-p g750gs-p thats models from BMW and i will check with my dealer if they avilable to purchase by public or indeveduals
--- End quote ---
yes, would be interesting...
My question to your current problem is still, can you have the D2 on the fork ON all the time?
then:
DR1 on the top : AUX1 and configured off by default - can always switch them ON when you go offroad
D7 in the middle: AUX2 and configured to be 100% at highbeam (day and night) while 0% on Low beam (day and night)
D2 on forks: powered by Accessory output
best
Stephan
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version