Author Topic: Measure the pressure sensor...  (Read 15861 times)

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #15 on: May 05, 2020, 02:34:48 PM »
Okay... and cross my fingers right?  ::)

Do i need any silicone to seal, or is it okay to reuse the rubber seal?

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 768
  • Karma: +51/-3
    • Dual Sport Motorcycle Clinic
Re: Measure the pressure sensor...
« Reply #16 on: May 05, 2020, 03:53:11 PM »
Okay... and cross my fingers right?  ::)

Do i need any silicone to seal, or is it okay to reuse the rubber seal?

To seal what?

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #17 on: May 05, 2020, 04:33:10 PM »
aah... sorry... i do mean the sensor on the outside ( the one with long cable ) there is a black rubber seal, can i reuse the rubber seal for it to be totally sealed?


« Last Edit: May 05, 2020, 04:39:23 PM by knappen »

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 768
  • Karma: +51/-3
    • Dual Sport Motorcycle Clinic
Re: Measure the pressure sensor...
« Reply #18 on: May 05, 2020, 08:32:24 PM »
aah... sorry... i do mean the sensor on the outside ( the one with long cable ) there is a black rubber seal, can i reuse the rubber seal for it to be totally sealed?

Yes you can.  No silicon required.

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #19 on: May 06, 2020, 10:29:37 AM »
Did solder it my self.. it ain't pretty but i work and the ABS pump gives no warning lights.
I do have some faultcodes in memory but it says NO under the fault.

But big THANKS for the HELP !  :)




Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 768
  • Karma: +51/-3
    • Dual Sport Motorcycle Clinic
Re: Measure the pressure sensor...
« Reply #20 on: May 06, 2020, 10:38:34 AM »
Did solder it my self.. it ain't pretty but i work and the ABS pump gives no warning lights.
I do have some faultcodes in memory but it says NO under the fault.

But big THANKS for the HELP !  :)

Awesome!  Congrats!  ;D [emoji106]

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #21 on: May 06, 2020, 10:45:55 AM »
Thanks...  But i could not have done it without your help  ;)

The bike is together now and the brakes works fine  :)

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 768
  • Karma: +51/-3
    • Dual Sport Motorcycle Clinic
Re: Measure the pressure sensor...
« Reply #22 on: May 06, 2020, 11:04:02 AM »
Thanks...  But i could not have done it without your help  ;)

The bike is together now and the brakes works fine  :)

[emoji106]  Glad to be of assistance.

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #23 on: May 18, 2020, 11:21:06 AM »
so i found another ABS pump and took out the sensors... did some measurement, what do you think about these values?

 

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 768
  • Karma: +51/-3
    • Dual Sport Motorcycle Clinic
Re: Measure the pressure sensor...
« Reply #24 on: May 18, 2020, 12:09:04 PM »
Front wheel sensor looks a little high, but you now know how to resolve that issue,  ;D

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #25 on: May 18, 2020, 12:16:35 PM »
Well i guess that you are right... just do it right the first time 😀

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #26 on: May 18, 2020, 02:21:15 PM »
i did solder it and now it does not work on the rear... there is no power to it...  :(
Do you have a solution for this?

It work fine when i tested it first, the values was fine but after the soldering something happened...
It seems like the electronic board(computer/circuit board) does not work all the time, it gives power sometimes and sometimes not

« Last Edit: May 18, 2020, 02:37:54 PM by knappen »

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #27 on: May 22, 2020, 08:38:27 AM »
so.. still fighting with my abs

Having fault codes but it comes and goes it says:
24971
Pressure in front wheel circuit too high
The fault is not present now.


but the values are perfect. Could this comes from air in the system?


Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 768
  • Karma: +51/-3
    • Dual Sport Motorcycle Clinic
Re: Measure the pressure sensor...
« Reply #28 on: May 22, 2020, 08:56:53 AM »
It is possible that you have an intermittent problem with the sensor.  It senses pressure too high, logs the error code, then returns to normal by the time you take the readings.

knappen

  • Newbie
  • *
  • Posts: 40
  • Karma: +0/-0
Re: Measure the pressure sensor...
« Reply #29 on: May 22, 2020, 09:54:11 AM »
so what shall i do? change the sensor.. change the ABS pump? or try to bleed the system again?   :-\ :'(