General Category > Technical

TPS adjustment fault K1200RS K1200GT

(1/2) > >>

dannehlj:
Hello,
the GS911 works perfectly except for one function: "Throttle sensor adjustment". The test starts (green bar, approx. 1/3 long) - after approx. 20 seconds the error message "Control unit gives no feedback" appears. I have tried this also with engine running  and also on two other motorcycles (1 x BMW 589 and 2 x BMW K41 - always the same error message).
Unfortunately there are no further instructions. I have looked in the Germanand US FAQ, but not able to find something. The german site has referred me to this forum.
For the test I use a new laptop from ACER with current updates. Installed is Windows 10 professional 64 bit.
Can someone help?
Especially this feature was the main reason to buy this rather expensive device, because I had to change the sensor and the manual adjustment is very imprecise.
Thanks and regards from Germany.

Note: I'm using the german version (refer attachents) - messages are translated . maybe not correctly.

WayneC:
I would suggest you lodge a support ticket with Hexcode - https://www.hexcode.co.za/contact-us-1

Jughead:
Is the bike on the centerstand with the sidestand retracted?

dannehlj:
Sorry, I have not seen the last message/question.
Yes. The bike is only on the centerstand with sidestand retracted.

Yesterday I checked, if the software is now working,... unfortunately not.

Any news regarding this bug?

Regards,

Joerg Dannehl
Germany

schuppi:
Hallo Jörg,

this basic setting is rejected by the control unit if the throttle valve is not closed.
Your control unit reports an opening angle of 3.2 °

Navigation

[0] Message Index

[#] Next page