General Category > ABS related issues

25070 internal control module error code - too much slip of rear wheel

<< < (3/3)

Jughead:

--- Quote from: lindsaywest on June 05, 2019, 06:03:36 PM ---Thanks for the picts they really help. doing a very rough count the ring would have around 50 indents. my picture looks like the top correct one.

--- End quote ---

If the photo you posted is of your bike, it is the incorrect one.  The photo you posted is the same as the lower photo I posted, which is for the later model (2007 +) and thus the reason for the fault you have.

Abs modules are not interchangeable.  You would need to have the DME and ZFE from the same bike, which would mean that you also need the keys and locks.  Then you would also need to change the wiring harness as the wiring is completely different for the two models.

lindsaywest:
The other option is to find a 2005 or 2006 final drive to replace mine. Thanks for the help

Jughead:

--- Quote from: lindsaywest on June 05, 2019, 08:32:35 PM ---The other option is to find a 2005 or 2006 final drive to replace mine. Thanks for the help

--- End quote ---

That would be first prize, yes.

Navigation

[0] Message Index

[*] Previous page