General Category > General Discussion

New TPMS cant wake up

<< < (3/3)

schuppi:
https://www.schradersensors.com/en-gb/our-products/motorcycle-tpms

These sensors are my first choice :), perfekt function, easy to adapt and less wight so that the
wheel balancing results with less wight.

Chetz86:
Hi,

I already manually put 5024699 into the gs911 but still cant detect the sensor? Anyway to learn the sensor ?


Tan

e7navy1999:
RU certain the battery is good? They are polarity sensitive as well so Neg/Positive must be correct.  Once the tire is rolling for about 1/8 mile-ish it will wake up if the battery is good.  When I have headaches such as this I go back to the basics.  Check battery with meter, check solder joints/polarity. maybe the little breather hold in the sensor has blockage?  Which batery did you use?  You have to buy the one with the leads or tabs already on the battery.  You can not solder directly to the battery as it most likely ruined it.  I used this battery but (ater you solder leads) you have to put shrink wrap all the way around it to prevnet it from shorting out   https://www.ebay.com/itm/TWO-CR2032-Lithium-Battery-with-solder-tabs-for-Super-Nintendo-NES-SNES-N64/283226327930?hash=item41f19acb7a:g:T3sAAOSwpwZb0Ivo

Chetz86:
Hi,

I already fade up with the alibaba sensor. That y i using kawasaki tpms . Once i manually key in the code (given at the forum)into the gs911( i already rewrite the original code), and i tie the sensor on the tyre and i start ride for a while. But the system still can detect the tyre air preasure.

e7navy1999:
sorry to hear that.  Some riders have great luck with the Chinese TPMS.  Could be just a bad one made on a Monday

Navigation

[0] Message Index

[*] Previous page