GS-911 V1904 (April 2019) software updates available

[Mornay]

Hi everyone

GS-911 V1904.1 is available for download as well as software updates for the GS-911wifi and GS-911usb Generation 2 interfaces.

The major changes in this release are support for R1250GS LC (K50), R1250GS Adv LC (K51), R1250RT LC (K52), R1250R LC (K53), R1250RS LC (K54), F850GS Adv (K82), F850GS (K81) 2018+, F750GS (K80) 2018+ _{Note that service functionality on the R1250 is unfortunately not supported yet, however it is on our to-do list!}

Also included is a vehicle order list (the selection that the vehicle was purchased as)

Note that this is a ongoing project - see the function chart to find out what has been implemented already and what still needs to be done.

Thank you.

[schuppi]

Hello Mornay

What am I missing? Can't find anything new on  http://www.hexcode.co.za/news

Thank you for a link

...and is there a way to install the english and the german version on one computer?
...and maybe to read and store the measurement values like the RDC info as a .txt file ( like VCDS it shows ;-)  )

[schuppi]

Mornay,
just taking a picture is not  is not practical

[Mornay]

Hi schuppi,

The news page has been updated with the latest release info:

http://www.hexcode.co.za/april-2019-software-updates-available

To answer your first question. Currently there is no way to install both English and German on the same computer and use them separately. In order for us to implement something like this properly we would need considerable development time and resources. Some good news is that a German 1904 update should be out relatively soon

Regarding your second question; do you want to store realtime values as a text file? If so, exporting the values to .csv with the software is already possible, as the .csv file can also be opened with a normal text reader. If this is not the case, do you mind elaborating what you mean?

Regards,
Mornay

[WayneC]

The news page has been updated with the latest release info:

The News at the top RHS of the forum could be updated as well 

[Nicol Carstens]

The News at the top RHS of the forum could be updated as well 

  First time I have ever noticed it. Thanks for pointing it out. Will look into it... 

[Macali]

hello, fantastic news For when will it be in Spanish? Thank you

[juankempen]

Hi, speaking from Brazil here. I update my GS911 and now it is unable to connect to the bike, a R1200GSA LC 2016. I get a mesage that the ignition is off but it is on, even with the engine runing it dont work with the mobile app and Windows.

Thank you for any help

Juan

[Mornay]

Hi, speaking from Brazil here. I update my GS911 and now it is unable to connect to the bike, a R1200GSA LC 2016. I get a mesage that the ignition is off but it is on, even with the engine runing it dont work with the mobile app and Windows.

Thank you for any help

Juan

Hi Juan,

Will you send an email with all the details of your interface to our helpdesk, they will be able to assist:

http://www.hexcode.co.za/contact-us-1