I cant find reason for this code, connectors checked from ZFE, instrument cluster, tyre pressure control unit, visually wires are ok. Problem started last autumn, after that I have replaced tyre pressure unit and it was ok for a while then started again.
Motorcycle Information
VIN: WB10380028ZU49464
Mileage: 86310.0 km
Cluster date: 28 helmikuu 1982
Next service date: 05 huhtikuu 2020
Next service distance: 95877 km
Factory I-Level: K024-07-10-500
Actual I-Level: K024-12-08-500
BMS-KP
BMS type: BMS-KP
Controller Type: Engine Controller
Part No.: 7717143
Hardware Index: 10
Coding Index: 02
Manufacture Date (YY/MM/DD): 2007-10-26
MCV: 0.6.0
FSV: 0.77.31
OSV: 2.3.1
Manufacturer: Bosch GmbH
HWOE No.: 28841755
Program status: 310I
Date release: QC12
Factory I-Level: K024-07-10-500
Actual I-Level: K024-12-08-500
VIN model year: 2008
1 fault codes found:
10218 CAN-bus Timeout: no communication with KOMBI (Instrument Cluster) control unit
The fault is not present now.
Tyre Pressure TPM
RDC/DWA type: Tyre Pressure TPM
Controller Type: Anti-Theft Alarm / Tyre Pressure Monitor
Part No.: 7720818
Hardware Index: C4
Coding Index: 4
Manufacturer: Schrader
HWOE No.: 28869747
MCV: 0.6.0
FSV: 2.1.0
OSV: 4.0.2
No fault codes found
ZFE-High
ZFE type: ZFE-High
Controller Type: Vehicle Electronics
Part No.: 7718037
Hardware Index: 03
Coding Index: 09
Manufacture Date (YY/MM/DD): 2004-04-15
MCV: 0.6.0
FSV: 2.2.1
OSV: 3.3.0
Manufacturer: Loewe / Lear
HWOE No.: 28850955
Factory I-Level: K024-07-10-500
Actual I-Level: K024-12-08-500
Speed sensor manufacturer is Bosch
Speed sensor type is DF11
ABS fitted
ESA fitted
ESA has hall sensor
Heated grips
Outside temperature sensor
Brake light switch status over CAN
Rear bulb replacement
Film type fuel sensor
Manual low beam off switch
Brake light type is LED
Rear light type is LED
Storage of temperature indication when engine hot
2 fault codes found:
41756 CAN-bus timeout to KOMBI (Instrument cluster) control module
The fault is not present now.
41792 Wake-up line malfunction, short-circuit
The fault is currently present.
Integral ABS 2 - CAN
Controller Type: ABS Brakes
Part No.: 7711978
HW Version No.: C1
Coding Index: 0
Manufacturing Date: 2007-11-14
HWOE No.: 29063603
Manufacturer: Continental Teves
MCV: 0.6.0
FSV: 2.2.0
OSV: 3.3.0
Free programming slots: 1
Serial No.: 67BE003C6
Hardware No.: 07682002
Hardware star No.: 07711978
1 fault codes found:
54104 CAN-bus timeout from KOMBI
The fault is not present now.
CAN-Kombi H/L
Cluster type: CAN-Kombi H/L
Controller Type: Instrument Cluster
Part No.: 7718195
Hardware Index: 05
Coding Index: 06
Manufacturer: Siemens VDO Automotive
Manufacture Date (YY/MM/DD): 2006-08-18
MCV: 0.6.0
FSV: 3.1.2
OSV: 3.3.10
HWOE No.: 28849787
Assembly No.: 7718195
Variant: K25 Adventure with ABS/ASC switch on one button
Factory I-Level: K024-07-10-500
Actual I-Level: K024-12-08-500
1 fault codes found:
37661 CAN-bus timeout with RDC (Tyre pressure) control unit
The fault is not present now.
