Author Topic: GS911 Failed to update  (Read 7771 times)

netaccs

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
GS911 Failed to update
« on: August 15, 2018, 01:08:25 PM »
Hello to all !

I have GS-911. The device works correctly. I have connected couple bikes with no problem.
Few days ago there was an update, which I can't install.
First try on MacOS, then on Windows 10 - on both OS can't install update.
When using the desktop application and select update, the update procedure is starting and after while it just reboots and offer to update again.
I connect the device to my wifi network and select update via web menu. After select update I see the progress bar about download and install,
but after reboot there was errors (attached files).
In web menu in top corner I see blink text:
No response...retrying 2.3.4....

Does anyone have the same problem?




WayneC

  • Beta testers
  • Hero Member
  • *
  • Posts: 1442
  • Karma: +32/-1
Re: GS911 Failed to update
« Reply #1 on: August 16, 2018, 03:03:08 AM »
The screen shot shows the firmware is rather old but the data pack is the current version, I would suggest lodging a support ticket with Hexcode

https://www.hexcode.co.za/contact-us-1

Nicol Carstens

  • Beta testers
  • Newbie
  • *
  • Posts: 35
  • Karma: +2/-0
    • HEX Innovate
Re: GS911 Failed to update
« Reply #2 on: August 16, 2018, 10:36:19 AM »
Thanks for the flag. Let's get in touch and get it sorted.

Nicol

DannyJohnson

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
    • PhenQ Results With Before And After Pictures
Re: GS911 Failed to update
« Reply #3 on: September 08, 2018, 08:35:34 AM »
Hello to all !

I have GS-911. The device works correctly. I have connected couple bikes with no problem.
Few days ago there was an update GNC phenq, which I can't install.
First try on MacOS, then on Windows 10 - on both OS can't install update.
When using the desktop application and select update, the update procedure is starting and after while it just reboots and offer to update again.
I connect the device to my wifi network and select update via web menu. After select update I see the progress bar about download and install,
but after reboot there was errors (attached files).
In web menu in top corner I see blink text:
No response...retrying 2.3.4....

Does anyone have the same problem?
When using the desktop application, I couldn't install update on a Win 10 system, but when I tried on a Win 7 system, the update installed successfully. Strange!
« Last Edit: October 22, 2023, 09:31:01 PM by DannyJohnson »