General Category > R1150 models
R 1150 GS MJ99 GS911 USB Gen2// No connection to ABS
h_c_82:
Neither of it. It is this one:
https://www.obd-2.de/shop/fahrzeugmarke/bmw/71/bmw-motorrad-adapterkabel-10-auf-16-pin
Maybe the pin connection is not wired the way the GS911 wants to have it.
WayneC:
Many of the ICOM-D adaptor cables available on EBay & around the web are poorly made with Chinese clones of the Kostal 10 pin round connector and some do have incorrect pin outs, The 1150GS has the ABS on pin 2 of the 10 pin connector so check that it goes to pin 8 of the OBDII plug
h_c_82:
Good Info! I checked it and its correct ABS Diag pin goes to Pin 8 on the OBD2 side. So the hardware seems to be in order. I am running out of ideas...
WayneC:
Since the adaptor cable pin out is correct I would check the continuity of the harness from diags socket back to the ABS unit, beyond that I could only assume the ABS is still not initialising fully & hence not communicating which can occur with the earlier ABS systems
Nicol Carstens:
--- Quote from: h_c_82 on July 26, 2018, 02:58:09 PM ---Any of the guys from Hexcode on this forum that can give me an answer?
--- End quote ---
Holger
Apologies for arriving late to the party. I will work with the support team here at HEX to see what we can do to assist. Sincere thanks for the support provided by the community to date on the topic.
Nicol
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version