Author Topic: Replacing ABS-module  (Read 5139 times)

Gunleif

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Replacing ABS-module
« on: July 15, 2018, 11:42:38 PM »
Hi.
I`m going to replace the Abs-modulator at a 2007 K1200 Gt with a second hand module. After mounting, is it just taking bleedtest, and bleeding, or is it anything else i should do with the GS911?

Take care. Gunleif.


mike d

  • Full Member
  • ***
  • Posts: 133
  • Karma: +3/-0
Re: Replacing ABS-module
« Reply #1 on: July 16, 2018, 07:19:13 PM »
As I recall, if you use a module from a different model it will need to be re-coded to the current bike. If it's from a K1200 then it should be o.k.

Mike

Gunleif

  • Newbie
  • *
  • Posts: 6
  • Karma: +0/-0
Re: Replacing ABS-module
« Reply #2 on: July 16, 2018, 10:33:28 PM »
Hi. Thank`s for answering. Recoding must be done at BMW workshop? 

mike d

  • Full Member
  • ***
  • Posts: 133
  • Karma: +3/-0
Re: Replacing ABS-module
« Reply #3 on: July 17, 2018, 12:32:40 AM »
If required, yes. The GS-911 cannot do this recoding.

Mike