General Category > ABS related issues
Another ABS problem
ManxGS:
OK. After much deliberation, I've decided that I'm going to remove the pump unit and run the bike with non assist brakes. I was wondering if anyone has done this and if there is a kit available somewhere? If not, getting the lines made should be straight forward, but its the warnings on the dash that will drive me mad.
ManxGS:
OK. Further update is the ABS is now bypassed. Wish I'd done this sooner. The brakes are so much more user friendly. No sudden grab or headlights dimming on night runs. Rang the lads at MotorWorks and they sent me a kit to bypass the pump unit. The unit has to have a modification inside to remove the power to the two pump motors but the ECU within it must remain as it controls the speedo. Then I removed the dash unit, broke it down and blanked out the red LEDs indicating the Brake failure warning and the red triangle, but the amber LEDs remain to light up the warning triangle when the fuel level gets to reserve. I'm a happy biker again.
mopedi:
Do you have your removed modulator for sale?
ManxGS:
--- Quote from: mopedi on August 31, 2017, 11:54:50 AM ---Do you have your removed modulator for sale?
--- End quote ---
Do you mean the ABS unit complete?
mopedi:
I presume you are using electronics to get tacho working or you upadted computers with non-abs one with some rewiring.
Do you have anything left from complete units?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version