General Category > General Discussion

2017 bikes with OBD connector: Can I use an adapter

<< < (2/4) > >>

kellenbenz:
I sold my old GS 911 and bought the new one due to ordering a 2017 RT. Will there be a factory adapter? If so, when might it be available.

Thanks,

Ron

schuppi:
Hi Ron,
Think that's one new construction part on the hexcode roadmap.
Just wait and watch http://www.hexcode.co.za/products/gs-911/roadmap

jacomodus:
Good friends open connector OBD2

hammick:
Not sure what I was thinking about the cable I ordered.  Both ends were wrong which makes sense as it's a cable to convert BMW diagnostic to OBDII.

Anyway I can confirm that the GS911 Wifi 100% works with my '17 GSA.  I used four wires to temporarily connect the pin from the OBDII connecter to the GS911.  Had to experiment a little to find Can high and low of the GS911 wifi but once I figured it out it worked just like it did on my '15 GSA.  I was able to reset the service reminder and scan all modules for faults.  The Iphone app doesn't work worth a crap but it didn't work much on my '15 GSA either.  The windows software works 100%

I will be making my own cable as I don't think one exists at this time with the proper female connectors.  Is it possible to get a BMW diagnostic plug some place other than from a totaled bike or a dealer?

The pinout conversion is as follows:

OBD pin 16 to GS911 pin 6 (12v +)
OBD pin 4 to GS911 pin 4 (ground)
OBD pin 6 to GS911 pin 7 (can high)
OBD pin 14 to GS911 pin 9 (can low)

kellenbenz:
The adapter cable is now available from the Beemershop. Here is the link:

http://www.gs911usa.com/GS-911_Accessories.html

Ron

Navigation

[0] Message Index

[#] Next page

[*] Previous page