GS-911 and ezCAN User Forum

General Category => GS-911 => Technical => Topic started by: Beagler on April 25, 2021, 01:45:24 PM

Title: Alarm faults
Post by: Beagler on April 25, 2021, 01:45:24 PM

Why do I get these faults but bike and alarm are fine. No faults on bike display

Bike is not keyless

XEWS4 : -
Controller Type : Immobilizer/Keyless Ride
Controller Name : XEWS4
Controller : 0x0F8C00
Serial Number : 0000023639
Manufacture Date (YY/MM/DD) : 17/10/12
Program Count : 2
Program Count Maximum : 1024
Firmware Date (YY/MM/DD) : 20/06/26
Kilometers when programmed : 0.00
Number of FW configurations : 3
..HW Electronics (HWEL) :
....Firmware ID : 0x0BFE
....Firmware Version : 003.001.000
..Bootloader (BTLD) :
....Firmware ID : 0x0BFF
....Firmware Version : 003.001.000
..SW Memory Image (SWFL) :
....Firmware ID : 0x0C01
....Firmware Version : 004.001.004
Fault Codes : 3

XDWA : -
Controller Type : Anti-Theft Alarm
Controller Name : XDWA
Controller : 0x0F8700
Manufacturer : META System S.P.A.
Manufacture Date (YY/MM/DD) : 17/05/08
VIN : Z263457
Program Count : 2
Program Count Maximum : 1024
Firmware Date (YY/MM/DD) : 20/06/26
Kilometers when programmed : 0.00
Number of FW configurations : 4
..HW Electronics (HWEL) :
....Firmware ID : 0x0A4C
....Firmware Version : 001.000.000
..Bootloader (BTLD) :
....Firmware ID : 0x0A49
....Firmware Version : 002.000.000
..SW Memory Image (SWFL) :
....Firmware ID : 0x0A4A
....Firmware Version : 002.000.011
..Coding Data (CAFD) :
....Firmware ID : 0x0A4B
....Firmware Version : 002.000.006
Fault Codes : 1
|
0x800029 : Alarm activation
Currently present : NO
Engine warning light (MIL) : NO
Frequency count : 2
Logistic (Healing) count : 0
..Fault Code History :
....Record number : 1
....Odometer : 3162.3 mls
....Absolute Time : 214748364
....Record number : 2
....Odometer : 3162.3 mls
....Absolute Time : 214748364

Title: Re: Alarm faults
Post by: Mats@MFT on April 26, 2021, 12:52:05 PM

Did anything specific happend at Odometer : 3162.3 mls ?

Title: Re: Alarm faults
Post by: Beagler on April 26, 2021, 12:58:57 PM

Alarm may have gone off whilst in garage. This fault logging has always occurred  but doesn't show on bike or affect the alarm functionality. Have replaced battery in alarm but old one was ok. Dealer said a while ago if bike doesn't show fault its ok. Does GS911 Diagnostic include Alarm function test.

Title: Re: Alarm faults
Post by: Mats@MFT on April 26, 2021, 01:22:25 PM

I don´see a problem there neither.
For the GS911 funtionality you might have to wait for an update: https://www.hexcode.co.za/products/gs-911/function_charts/xdwa_func_chart

Title: Re: Alarm faults
Post by: Beagler on April 26, 2021, 01:24:39 PM

Quote from: Mats@MFT on April 26, 2021, 01:22:25 PM

I don´t see a problem there neither.
For the GS911 funtionality you might have to wait for an update: https://www.hexcode.co.za/products/gs-911/function_charts/xdwa_func_chart

Thought so but wanted others view. Thanks for your help.

Title: Re: Alarm faults
Post by: WIZARD1325 on June 23, 2024, 09:38:57 PM

I keep getting this fault code

my alarm does now go off when i take it off the kick stand or shake the bike hard