Print Page - abs error code 24053 internal control module

Title: abs error code 24053 internal control module
Post by: GSAFAN on February 04, 2017, 08:07:48 PM

Has anyone had this error code: 24053 internal control module error for abs ii
2011 R1200GS adv.

Thanks

Title: Re: abs error code 24053 internal control module
Post by: schuppi on February 06, 2017, 11:32:29 AM

Hello
Here is the explanation for 24053

Condition for fault memory entry Fault in the electronic control unit (ECU);
Strong, sporadic, electromagnetic interference from outside
Action in service Observe fault:
If the control unit has already been replaced once because of this fault, then presumably EMC problems are the cause;

Otherwise replace control unit

Title: Re: abs error code 24053 internal control module
Post by: GSAFAN on February 06, 2017, 06:20:53 PM

Thanks for the reply Wolfgang, to my knowledge the ecu is original. Will check into this further. again thank you for your detailed reply.

GS-911 and ezCAN User Forum

General Category => Technical => GS-911 => ABS related issues => Topic started by: GSAFAN on February 04, 2017, 08:07:48 PM