GS-911 and ezCAN User Forum

General Category => Technical => GS-911 => ABS related issues => Topic started by: Blackamati on November 12, 2017, 10:26:43 AM

Title: 2005 1200GS unsupported fault codes
Post by: Blackamati on November 12, 2017, 10:26:43 AM
Hi guys,
You will notice from the following autoscan that I did on my sons 2005 1200GS that there are two error codes saying that Factory level 1 not supported’?
Presume that this is nothing wrong just that the information isn’t available from a 2005 bike? Or is it more serious?

AutoScan : -
Base System Version : 0.254 - 0.150
Serial Number : GS1 008 172
Registration : Norman Hill
Date : 2017-10-02 15:22:55
Bike Information : -
VIN : WB10307A45ZR24270
Odometer : 41134.8 mls

BMSK : -
Controller Name : BMSK
Part No. : 07697304
Hardware Index : 10
Coding Index : 01
Manufacture Date (YY/MM/DD) : 2005-03-03
MCV : 0.5.6
FSV : 0.77.14
OSV : 2.3.1
Manufacturer : Bosch
Program status : 149E
Date release : 5C12
VIN : WB10307A45ZR24270
Odometer : 41134.8 mls
Factory I-Level : Service or function not supported
Actual I-Level : Service or function not supported
Fault Codes : 2
Title: Re: 2005 1200GS unsupported fault codes
Post by: schuppi on November 12, 2017, 06:41:13 PM
Hi Norman

That's the same as mine. That is only the discription for this funktion in that older module.
For excample:
BMS-K
BMS type:   BMS-K
Part No.:   7704861
Hardware Index:   10
Coding Index:   01
Manufacture Date (YY/MM/DD):   2006-09-05
MCV:   0.5.8
FSV:   0.77.22
OSV:   2.3.1
Manufacturer:   Bosch
HWOE No.:   25808213
Program status:   220E
Date release:   5C10
Factory I-Level:   Not set
Actual I-Level:   Not set
VIN model year:   2007
Fault Codes : 2     <<<<<>>>>> Please read the following lines!
Here are the discriptions of the stored faults :) :) 8)