GS-911 and ezCAN User Forum

General Category => GS-911 => Technical => Topic started by: Blackamati on April 14, 2018, 06:18:52 PM

Title: 2006 GS will not switch on GS911
Post by: Blackamati on April 14, 2018, 06:18:52 PM
Hi Guys,
Since buying the GS-911WIFI for using on my 1200RT I have attracted two friends who have bought GS’s and ask me to look after them.....especially so with my shiney GS-911WIFI 😎
Yesterday my best mate bought a 2006 GS and asked me to spend whatever to make it wonderful🤷‍♂️.
I plug into his GS the 911, switch on the ignition ready to link it on my iPad, I still have 2 bike licences left, but the bike will not power up the 911😱. No power green light, just nothing. What am I doing wrong??
Title: Re: 2006 GS will not switch on GS911
Post by: Mornay on April 16, 2018, 07:49:19 AM
Is there any physical damage to your mate's plug?

if your bike powers the GS-911 and the GS cannot power the GS-911, the fault lies with his bike's diagnostic port.
Title: Re: 2006 GS will not switch on GS911
Post by: Jughead on April 16, 2018, 08:01:20 AM
Check to see whether you have power on the diagnostic port pins.

(https://os.mbed.com/media/uploads/fossum_13/xie21.jpg)

Pin 3 is GND
Pin 1 is switched power (12V with ignition ON)
Pin 2 is unswitched power (12V with ignition ON/OFF)