Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
F Series / BMW F650GS coding RDC
« Last post by Addy_RUS on March 26, 2024, 07:09:57 PM »
I purchased a BMW F650GS twin. There is no RDC on it. If I purchase an RDC unit with sensors, can I use the GS-911 to link it to my motorcycle?
22
GS-911 / Re: Alarm system battery fault code won't clear
« Last post by Morrington on March 26, 2024, 06:56:24 PM »
Thanks for your reply.

I think that may be the problem. No fault is shown on the gs911 but the fault shows on the dash. It's as if the gs911 is not aware that there is a fault.
I'll do another autoscan later and see if anything changes.
23
Engine related issues / Re: 2007 1200GSA fault codes 10150/1
« Last post by Ruan on March 26, 2024, 03:25:48 PM »
Hi Prinsloow

Best would be to include an autoscan of your bike, if you enter those codes below you get a few dozen ECUs back - faults range from tank-vent to injection valve:
https://bmwfault.codes/

Download the autoscan as a text file and paste it in your response here.

Kind regards
Ruan
24
GS-911 / Re: Alarm system battery fault code won't clear
« Last post by Ruan on March 26, 2024, 03:23:38 PM »
Hi Morrington

Best would be to share an autoscan of your bike with the fault code present - download it as text and paste it in your response here.

Without any more info there really isn't much we can do to help unless someone has experienced this exact issue.

Kind regards
Ruan
25
GS-911 / Alarm system battery fault code won't clear
« Last post by Morrington on March 26, 2024, 02:37:01 PM »
Hi,

Gs911 WiFi with Nov 2023 update on a 2021 S1000RR.

It turns out I have a fault code showing regarding my alarm system battery being empty. I've replaced the batteries and cleared all faults through the Auto scan so none show however I continue to have the big yellow empty alarm system battery fault showing on my dash after I switch the bike off and on again. No matter what I do I can't seem to clear it.

Does anyone know if the gs911 is capable of clearing this or is it a dealer only kind of thing.

Thanks.
26
General Discussion / Re: Any insights
« Last post by principalhorror on March 25, 2024, 06:47:51 AM »
Thank you. I have solved my problem
27
R1200 models / EWS issue. Error code 37633
« Last post by bojan on March 24, 2024, 04:06:05 AM »
I have 2010 R1200GS. It was runnig perfectly fine. Stopped for short break and when I tried to start it again EWS code popped up on the instrument cluster. I got new antenna ring and tried that fix with the spare key to no avail. I have run diagnistic via GS-911. It found an error under Instrumet Cluster. error code 37663 (Can bus communication error). The bike s usualy parked inside and contaCTS corrosion is unlikely the issue. No visible damage to any cables around ignition switch. Any ideas or suggestions? The bike is dead in the water and it will be very long tow to the nearest qualified shop.
28
GS-911 / Re: What is being tested in beta
« Last post by GS_Al on March 23, 2024, 04:52:13 PM »
I have a 2023 R1250GS Rallye and I'd be happy to be a beta tester.  I assume I post here and someone messages me in due course, but let me know if I need to do anything else.
29
Themen rund um den Motor / Re: Drosselklappenpotentiometer R1100S
« Last post by ThomasK on March 21, 2024, 03:11:41 PM »
Vielen Dank, Wolfgang

Dann gehe ich das heute Abend einmal an.

Beste Grüße, Thomas.
30
Themen rund um den Motor / Re: Drosselklappenpotentiometer R1100S
« Last post by schuppi on March 21, 2024, 12:40:48 AM »
NUR die Zündung einschalten
Startanhebung (Choke) aus, Drosselklappen in Leerlaufstellung, Gaszug korrekt eingestellt (mit Spiel)
Motorsteuergrät anwählen
Sevicefunktion anwählen
Grundeinstellung Anpassung DKP Balkendiagramm zeigt grünen Bereich bei korrekter Einstellung
Pages: 1 2 [3] 4 5 ... 10