GS-911 and ezCAN User Forum
General Category => GS-911 => Technical => Topic started by: jambo on March 04, 2021, 06:07:02 AM
-
2018 1200GS TFT, 14,000 miles. Strange problem with my tire pressure senders. I took the bike for a ride today and at first the pressure seiners measured +0.0 for both. Then they measured what seemed to be right, +.5 front and +1.4 rear, but throughout the whole ride they never changed. I stopped and power cycled the motorcy cue. The rear came back but the front never came back online.
The motorcycle is 3 years old with little mileage so I don't think the batteries are gone in the senders, but its. very strange how the sensors are working.
Can I reset the sensors with the GS911 and see if they start working again?
Thank you!!!
James
-
If your 2018 model is like my 2007, the displayed values will not change. Instead, they are corrected to 20C (68F).
-
Karl, I think you are right but it’s strange how both front and rear stopped working correctly at the same time. Also the fact that the rear came back a bud the front is not not reading is strange.
I read in another forum that you can reset the senders with the GS-911wifi and I don’t think they meant reset the senders but re-pair the senders.
I am wondering if that is a possibility and if anyone has seen this before.
There are no fault codes.
Thank you.