GS-911 and ezCAN User Forum
General Category => ezCAN => Topic started by: mzalusky@comcast.net on July 02, 2017, 03:43:10 PM
-
Hey All;
i have a 2016 R1200RT LC.
My bike runs fine. but during a scan, i have undefined code for XBCL 800e82 and 800e83. to contact hexcode.
any ideas. just curious, as i said the bike runs perfect.
thanks
Zeke
-
I suggest to contact our support team at support@hexcode.co.za. If possible attach an autoscan to the mail too.
Mornay
-
I just had a 800E88 and it was a burnt out Hi Beam, maybe check all your lights as the numbers are close (if that means anything). Does it say anything else on the autoscan?
-
Hello Zeke,
think there is something wrong with the horn.
800E83 > means > Horn, open circuit.
Any changes in this area?
-
hey all;
thanks for the replies.
the headlights are fine. Changed to hid about a year ago, but no issues there.
also, the horn was changed to a louder style horn from a 5 series bmw. plug and play. works fine just louder.
but if that is all it is i will ignore it.
Again. the bike runs perfectly fine.
any input is good input.
Zeke
-
hey all;
thanks for the replies.
the headlights are fine. Changed to hid about a year ago, but no issues there.
also, the horn was changed to a louder style horn from a 5 series bmw. plug and play. works fine just louder.
but if that is all it is i will ignore it.
Again. the bike runs perfectly fine.
any input is good input.
Zeke
Just wondering if you ever pushed the horn button with the new horn connected?
-
Oh yes;
I live in South Florida. its more than necessary. i see what your asking, if i use the horn do i get the alarm. I will check that tomorrow when someone tries to run me over again.
Zeke
-
Oh yes;
I live in South Florida. its more than necessary. i see what your asking, if i use the horn do i get the alarm. I will check that tomorrow when someone tries to run me over again.
Zeke
Sorry I wrote it wrong. I meant to ask if you had ever pushed the button prior to the new horn being attached i.e. no horn at all? I have my horn connected directly to the HEX ezcan so nothing connected to the stock horn connector and I get the error as well. Nothing really to worry about though as long as your horn is working