GS-911 and ezCAN User Forum
General Category => Model Specific Discussions => Technical => GS-911 => S Series => Topic started by: motogp on June 06, 2014, 06:02:07 AM
-
My 2014 s1000r is now due for 600mile service. I have done all the maintenance {oil change.chain lube and adjust etc. }. BMW restricts rpm during breakin.and I have to reset the service lamp my GS911 will not communicate with the bike!!
-
the new S1000R is a K001 chassis bike... that means it is the same chassis (electrically) than the K48 (K1600) and the K50 (R1200GS LC), K51 (R1200GS Adv LC), K52 (R1200RT LC) and K17 (C-evolution scooter)
if you look closely at the pinouts of your bike's diagnostic connector and compare those to the pinouts on the GS-911, you will note that they differ
This model will thus require the new GS-911wifi that we are working on... send me a PM - might need to test on your model (wink-wink nudge-nudge)
best
Stephan
-
Thank you for the reply. If there is any way that I can assist you in developing the new scanner , contact me.