GS-911 and ezCAN User Forum
General Category => General Discussion => Topic started by: GixY2K on June 10, 2015, 11:45:58 PM
-
I just got off the phone with Ted from Beemer Shop and he told me that the new Beta version of the GS911 is out and supports the S1000RR 2015.
-
Did Ted indicate whether he was referring to GS911 WiFi Firmware beta or PC app beta ?, bit of a difference between the two ;D
I noticed there is an update on the public release of the GS911 WiFi firmware which does have updated model support as I just updated one myself
-
I believe both as I just installed the beta version of the software and as soon as it detected the GS911 WiFi, it indicated that it needed a firmware update (currently running).
I'll test it on my 2015 S1000RR shortly and report back.
P.S. Hopefully this will also fix the problem I was having while trying to connect to my home WiFi network.
Preliminary testing done.
- I was able to set the rev limiter to 0 (from 1) which I believe turns off the limiter used during break in period.
- I was able to read most parameters. The bike was off, and it is kind of late to go take it for a ride or run the engine.
I'm going to retire for the night. Tomorrow I'll see if I can change the oil and take it for a real spin.
Thank you Hex folks and Ted. Good Job!
The only pending issues now are:
- Autoscan fails to do anything. I get an error that it cannot communicate with controller.
- The GS911 WiFi still can't detect my home WiFi
-
When you say you just installed the beta version of software I suspect you mean an updated WiFi Launcher ?
EDIT, OK see what you mean, there is a new beta for PC, downloading it now, suspect it may make some Husky Terra owners pleased as well
-
there is a new beta for PC, downloading it now, suspect it may make some Husky Terra owners pleased as well
Woo hooo :o
I hope so. I've been hanging for this for the last 12 months.
Please verify once you get it running and I'll get my order into the system.
-
Yes it loaded and ran without problems and as I indicated there are now a couple of Husky Terra owners who are pleased they now have a tool to look into their machines, I tested it on the Terra yesterday. There was an update on the WiFi firmware as well and that also has the Terra support
-
Looks like you jumped the gun a bit, the official announcement is here: http://forum.hexcode.co.za/forum/index.php/topic,898.0.html
We usually need some time to update the website after uploading new software before making an announcement, especially with the Function Chart (http://www.hexcode.co.za/products/gs-911/function-chart) now becoming a bit of a monster to manage ;)
-
Ah well it is the quick and the dead you know ;D, you should also note I was not the first to notice but the email from this thread yesterday came about 1 hour after one of the Terra owners here asked if I would come over and test into his machine while he was prepping it for a 1700 km dirt run so it was rather timely and worked out very well for everyone, now I need a weekend to recover from the long day yesterday ;D
-
Yes its new. Yes it does the 2015 S1000RR...
BUT
Still no functionality to change units from Miles to Kilometers and back which is a real bummer for me. The GS911 could do that with the old bikes....and this GS911wifi, with all these updates....still doesnt do this. :-\ :-[ :(
Oh well....we wait another 6 months for another update...maybe then :'( :'( :'(
-
fotodadi, in general our priorities are first to implement critical diagnostic functionality (ie. I need to fix/service my bike now!) and then move on to coding functionality.
For instance on the K001 chassis models we wil first implement ABS service functionality, XESA (ie. re-calibrate the suspension) and XRDC (failing tyre sensors...) before we get to coding.