GS-911 and ezCAN User Forum

General Category => GS-911 => Technical => Topic started by: jambo on March 04, 2021, 06:07:02 AM

Title: Tire pressure senders
Post by: jambo on March 04, 2021, 06:07:02 AM
2018 1200GS TFT, 14,000 miles.  Strange problem with my tire pressure senders.   I took the bike for a ride today and at first the pressure seiners measured +0.0 for both.  Then they measured what seemed to be right, +.5 front and +1.4 rear, but throughout the whole ride they never changed.  I stopped and power cycled the motorcy cue. The rear came back but the front never came back online.

The motorcycle is 3 years old with little mileage so I don't think the batteries are gone in the senders, but its. very strange how the sensors are working.

Can I reset the sensors with the GS911 and see if they start working again?

Thank you!!!

James

Title: Re: Tire pressure senders
Post by: karlh on March 04, 2021, 01:57:54 PM
If your 2018 model is like my 2007, the displayed values will not change.  Instead, they are corrected to 20C (68F).
Title: Re: Tire pressure senders
Post by: jambo on March 04, 2021, 03:04:49 PM
Karl, I think you are right but it’s strange how both front and rear stopped working correctly at the same time. Also the fact that the rear came back a bud the front is not not reading is strange.

I read in another forum that you can reset the senders with the GS-911wifi and I don’t think they meant reset the senders but re-pair the senders.

I am wondering if that is a possibility and if anyone has seen this before. 

There are no fault codes.

Thank you.