GS-911 and ezCAN User Forum

General Category => General Discussion => Topic started by: Antonio_beqa on October 01, 2019, 05:47:14 PM

Title: 18RR GS911 not functioning fully
Post by: Antonio_beqa on October 01, 2019, 05:47:14 PM

Hello i have S1000RR 2018 , i bought GS911 USB OBD II , i was looking for abs functions on it for example to bleed abs like in videos but when  i am opening ignition and lookig on gs program there is not such functions, also i bought it to change Miles to KM but also i dont have that functions why ? Am i doing somthing wrong or ?

Title: Re: 18RR GS911 not functioning fully
Post by: schuppi on October 01, 2019, 11:38:45 PM

Hello

"also i bought it to change Miles to KM"
Shown in the Riders Manual:
Selecting submenu
Setup EQIP:UNITS
Change unit of measure forspeed: UNIT SPEED KM⁄H or UNIT SPEED MPH
Change unit of measure for odometer: UNIT ODO KM or UNIT ODO MLS
Change unit of measure for temperature: UNIT TEMP DEG: C or UNIT TEMP DEG: F
Change unit of measure for average consumption: UNIT CONS L⁄100,   UNIT CONS MPG: US,   UNIT CONS MPG: UK  or  UNIT CONS KM⁄L
Set 24-hour or 12-hour mode for clock: UNIT CLOCK 24 or UNIT CLOCK 12

"abs functions on it for example to bleed abs"
...bleeding ABS-System as documented in the repair and service manuals. There is no GS911 function.
Maybe there is a bleeding test to find trapped air bubbles. Than you have to repeat this documented bleeding.
Simple precise workmanship!
http://www.hexcode.co.za/products/gs-911/function_charts/xabs_func_chart
XABS  Function Tests
   Pump actuation test       yes    -    yes
   ABS Bleed test               yes    -    yes

Hope this helps

Title: Re: 18RR GS911 not functioning fully
Post by: Antonio_beqa on October 02, 2019, 01:24:59 AM

Unfortu atly in my motorcycle there is not option equipment units , when going to equipment setup , and yes i am talking about abs bleeder test but i can not see it in gs911 program could you help me ?

Title: Re: 18RR GS911 not functioning fully
Post by: Mats@MFT on October 02, 2019, 01:31:16 PM

Hi Antonio,

ABS bleed test and so on should work for RR´s with K46 chassis (2nd. generation) http://www.hexcode.co.za/products/gs-911/function_charts/xabs_func_chart
but if you might have already a newer K67 type (3rd. Generation) you might have to wait for a GS-911 software update

Title: Re: 18RR GS911 not functioning fully
Post by: Antonio_beqa on October 02, 2019, 01:34:03 PM

I have gen 2   my moto is 2018 on frame 2017 sticker  but in gs911 program i cant see abs or brakes

Title: Re: 18RR GS911 not functioning fully
Post by: schuppi on October 02, 2019, 01:46:15 PM

Hello

So i would prefer a full auto-scan 8)

just to see which motorbike we are dealing with

Title: Re: 18RR GS911 not functioning fully
Post by: Antonio_beqa on October 02, 2019, 01:49:25 PM

I will do it in 1 hour and put it and also send to email

Title: Re: 18RR GS911 not functioning fully
Post by: Mats@MFT on October 02, 2019, 01:53:40 PM

Antonio - let us also please know which ABS subfunctions are listed in your GS software

Title: Re: 18RR GS911 not functioning fully
Post by: Antonio_beqa on October 02, 2019, 02:02:20 PM

As i can see gs911 have great support thanks for helping i will send log and also i will make video of everything just give me a link wheere to upload video and then you can download and see video

Title: Re: 18RR GS911 not functioning fully
Post by: Ruan on October 02, 2019, 02:26:52 PM

Hi Antonio

As discussed, please send the additional information (autoscan, serial number and photo's/videos) to our support desk listed below:
https://www.hexcode.co.za/contact-us-1

Thank you
Ruan