GS-911 and ezCAN User Forum
General Category => GS-911 => Technical => Topic started by: phantom044 on June 07, 2018, 11:00:47 PM
-
hi friends..i have 04 bmw r1150gs adv..i want adjust tps but i receive this message'' idle switch sould be off position''what can i do ?
i need a help
thanks
-
hi friends..i have 04 bmw r1150gs adv..i want adjust tps but i receive this message'' idle switch sould be off position''what can i do ?
i need a help
thanks
[/quote
Also following this.]
-
hi friends..i have 04 bmw r1150gs adv..i want adjust tps but i receive this message'' idle switch sould be off position''what can i do ?
i need a help
thanks
Hi Phantom, you get around!!
Check the posts under "Model Specific" these is a conversation there about your issue.
Peter
-
Phantom044
Here's how to adjust the TPS. Follow the steps.
Back out the butterfly stop screw on the LHS TB until the butterfly is completely closed and the butterfly stop is not in contact with the screw.
Connect a multimeter to pins 1 and 4 of the TPS
Adjust TPS to give 0.25V on the MM and tighten the screws, ensuring that you maintain the 0.25V.
Now turn the butterfly stop screw in until you achieve 0.36V on the MM.
Lock the butterfly stop screw.