GS-911 Version 1507.2 Released

[WayneC]

Yes the difference between the users and age of the old interface has been the aspect running through my mind, especially since I have spent a few days on support in a repair workshop  , ICOMs and wireless can be a real pain at times

The best I have come up with is the idea of the tick box as it leaves the existing familiar interface in place without upsetting the old school users and only reminds those like me used to WiFi, to save, basically the same as WiFi, it also does not add the complexity of a buffer which must be cleared when ending sessions and we all know how good windows is at clearing temps 

[Dann]

The issue regarding your particular ESA configuration has been discussed here.
This is not going to go away by itself and cannot be fixed by anything we do on our side, unless we ignore the ZFE configuration bits that tells us if an ESA with Hall sensor is fitted - but that will cause a lot of support questions like "Hey, I get an error while running this calibrating ESA function thingy" answered with "well... it's because you do not have ESA" 

It's not a big deal. Everything is working, that's what matters.

[Dann]

The issue regarding your particular ESA configuration has been discussed here.
This is not going to go away by itself and cannot be fixed by anything we do on our side, unless we ignore the ZFE configuration bits that tells us if an ESA with Hall sensor is fitted - but that will cause a lot of support questions like "Hey, I get an error while running this calibrating ESA function thingy" answered with "well... it's because you do not have ESA" 

Now this is strange...

If I do an autoscan using Wi-Fi, with Firefox, It reports everything right. ie: actual I-Level and ESA
If I do it using the usb cable and the PC software it reports that the actual I-Level is unknown and doesn't mention that the bike is fitted with ESA.

Here are the 2 autoscan reports:

With USB cable and PC software:

AutoScan Report

GS-911 version: 1507.2 Datapack version: 2.5 Serial Number: GS1 000 696 Registered to: Daniel Ouellette
Date: 8/8/2015 Time: 2:07:23 PM
Motorcycle Information
VIN: WB10368067ZR65088
Mileage: 103476.0 km
Cluster date: 17 September 1982
Next service date: 12 July 1238273
Next service distance: 169011 km
Factory I-Level: K024-07-02-500
Actual I-Level: Unknown I-Level:0x88
BMS-KP
BMS type:   BMS-KP
Part No.:   7719873
Hardware Index:   10
Coding Index:   02
Manufacture Date (YY/MM/DD):   2007-05-02
MCV:   0.6.0
FSV:   0.77.33
OSV:   2.3.1
Manufacturer:   Bosch
HWOE No.:   61763344
Program status:   330I
Date release:   6C10
Factory I-Level:   K024-07-02-500
Actual I-Level:   Unknown I-Level:0x88
VIN model year:   2007


No fault codes found
ZFE-High
ZFE type:   ZFE-High
Factory I-Level:   K024-07-02-500
Actual I-Level:   Unknown I-Level:0x88
Part No.:   7720220
Hardware Index:   03
Coding Index:   09
Manufacture Date (YY/MM/DD):   2004-04-15
MCV:   0.6.0
FSV:   2.7.0
OSV:   3.3.0
Manufacturer:   Loewe Lear
HWOE No.:   61766200
Factory I-Level:   K024-07-02-500
Actual I-Level:   Unknown I-Level:0x88
   Speed sensor manufacturer is Bosch   
   Speed sensor type is DF11   
   ABS fitted   
   Heated grips   
   Heated seat driver   
   Heated seat passenger   
   Outside temperature sensor   
   Brake light switch status over CAN   
   Film type fuel sensor   
   Manual low beam off switch   
   Storage of temperature indication when engine hot   
   Electronic windscreen present   
   Cruise control present   


No fault codes found
Integral ABS 2 - CAN
Part No.:   7707617
HW Version No.:   C1
Coding Index:   0
Manufacturing Date:   2007-05-14
HWOE No.:   61664272
Manufacturer:   Continental Teves
MCV:   0.5.9
FSV:   2.0.2
OSV:   3.3.0
Free programming slots:   1
Serial No.:   675E00058
Hardware No.:   07682002
Hardware star No.:   07707617


No fault codes found
CAN-Kombi H/L
Cluster type:   CAN-Kombi H/L
Part No.:   7718209
Hardware Index:   C6
Coding Index:   04
Manufacturer:   Siemens VDO Automotive
Manufacture Date (YY/MM/DD):   2007-02-08
MCV:   0.6.0
FSV:   1.7.1
OSV:   3.3.10
HWOE No.:   61750032
Assembly No.:   7718209
Variant:   K25 with ABS/ASC switch on one button
Factory I-Level:   K024-07-02-500
Actual I-Level:   Unknown I-Level:0x88


No fault codes found

---------------------------------------------------------------------

With Wi-Fi and Firefox:

AutoScan : -
Base System Version : 0.228 - 0.125
Serial Number : GS1 000 696
Registration : Daniel Ouellette
Date : 2015-08-08 13:58:26
Bike Information : -
VIN : WB10368067ZR65088
Odometer : 103476.0 km
Factory I-Level : K024-07-02-500
Actual I-Level : K024-15-07-500
Distance to next service : 65535.0 km
Service due date : 255-255--00
Motorcycle Date : 17-09-1982
- :
BMSKP : -
Controller Name : BMSKP
Part No. : 07719873
Hardware Index : 10
Coding Index : 02
Manufacture Date (YY/MM/DD) : 2007-05-02
MCV : 0.6.0
FSV : 0.77.33
OSV : 2.3.1
Manufacturer : Bosch
Program status : 330I
Date release : 6C10
VIN : WB10368067ZR65088
Odometer : 103476.0 km
Factory I-Level : K024-07-02-500
Actual I-Level : K024-15-07-500
Fault Codes : 0
No Faults found :
- :
ZFE-High : -
Controller Name : ZFE-High
Part No. : 07720220
Hardware Index : 03
Coding Index : 09
Manufacture Date (YY/MM/DD) : 2004-04-15
MCV : 0.6.0
FSV : 2.7.0
OSV : 3.3.0
Manufacturer : Loewe Lear
Factory I-Level : K024-07-02-500
Actual I-Level : K024-15-07-500
Configuration :
: Speed sensor manufacturer is Bosch
: Speed sensor type is DF11
: ABS fitted
: ESA fitted
: ESA has hall sensor
: Heated grips
: Heated seat driver
: Heated seat passenger
: Outside temperature sensor
: Brake light switch status over CAN
: Film type fuel sensor
: Manual low beam off switch
: Storage of temperature indication when engine hot
: Electronic windscreen present
: Cruise control present
Fa

[WayneC]

Well done Dann, here is why a public beta is a good idea, many hands make light work, over to you Kobus 

[kobus]

Thanks for spotting that Dann, it will be addressed in the next release.

[WayneC]

Kobus

Was using the PC App for a couple of tasks, one thing which struck me was lack of a progress bar on autoscan, nothing fancy just something to indicate the app is performing the scan, the WiFi has some indications there but not the PC App

Another aspect is lack of highlighting of menu's on mouse over, will become more important with touch screen small form factor PC's

Not that you needed some more items for the todo list