« previous next »
Pages: [1]

Author Topic: Centre Stand  (Read 18523 times)

kjhunt

  • Newbie
  • *
  • Posts: 36
  • Karma: +1/-0
Centre Stand
« on: March 19, 2015, 08:01:53 AM »
Good day every one. Regarding the centre stand on the R1150 GS Adventure, how to remove.
Remove the machine screws in the bearing bushings, but then how do you remove the Right and Left bushings? They turn for awhile and edge out a little then that is that.
Thoughts on the matter please.
Ken Hunt
Logged

schuppi

  • Hero Member
  • *****
  • Posts: 558
  • Karma: +21/-0
Re: Centre Stand
« Reply #1 on: March 19, 2015, 11:07:13 AM »
Hi Ken,
what about to warm up the bushings, because they are mounted with LOCTITE 243 :D.

Wolfgang
Logged
Schönen Tag
Wolfgang
                                       talk less, drive more

TAJL

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: Centre Stand
« Reply #2 on: March 19, 2015, 02:03:44 PM »
Grip them with pliers and wobble and pull. When you refit them make sure that you fit the thicker one on the right.
Logged

kjhunt

  • Newbie
  • *
  • Posts: 36
  • Karma: +1/-0
Re: Centre Stand
« Reply #3 on: March 20, 2015, 12:53:03 AM »
Many thanks for your reply, will try that later today when rain stops. Grateful for your advise. Ken
Logged

kjhunt

  • Newbie
  • *
  • Posts: 36
  • Karma: +1/-0
Re: Centre Stand
« Reply #4 on: March 20, 2015, 05:22:03 AM »
Hi again, just to say thanks again. Worked a treat as you said and the bushings came out. Now to look for a new centre stand, not cheap here in the Philippines. Bye Ken...
Logged

TAJL

  • Newbie
  • *
  • Posts: 19
  • Karma: +0/-0
Re: Centre Stand
« Reply #5 on: March 21, 2015, 12:06:54 AM »
Take your broken stand to a welder and get it repaired.  ;)
Logged

kjhunt

  • Newbie
  • *
  • Posts: 36
  • Karma: +1/-0
Re: Centre Stand
« Reply #6 on: March 21, 2015, 02:32:27 AM »
Hi. Yes I plan to do that, matter of finding the right person to do the job, lot of "cowboys" here. Thanks again. Ken
Logged
Pages: [1]
« previous next »