Front TPS R1200RT 2007

[vtr1000]

Hello,

First post and hopefully some helpful advice - please.

My front sensor stopped working, I bought a new one, fitted it when a new tyre was needed, connected mt GS911 and the sensor gave a reading of the tyre pressure in the bike display. After a few minutes the reading in the display disappeared for the front.

I've been for a ride today and there is no reading from the front - what am I doing wrong.

Apologies if I have missed a previous post on this.

Nigel

[vtr1000]

Here's the image from today's attempt.

Any ideas?

[justscootin]

The tire pressure monitor unit has to be paired with the bike with a special tool from bmw

[vtr1000]

Thank you.

I thought part of the functionality of the GS911 was to enable pairing of the sensors to the bike.

A reading (both pressure and temp) from the new one was seen when I first connected the GS911 to the bike after a run and it said all was ok.

[justscootin]

You will find a picture with a brief description of the tool right out of the workshop manual. I believe the gs911 will not work because the tire pressure monitor unit is an option and not part of the origional  bike.
Hope this helps
$633 in the States

[WayneC]

From memory there is another thread here with how to do it, I think Jughead posted the info

[justscootin]

http://www.hexcode.co.za/products/gs-911/procedures/rdc

This is the link
Thanks

[vtr1000]

Thanks again.

The above image I posted was after following the procedure in the link - rapidly deflating didn't make the sensor wake.

It does say that both sensors are ok though which is confusing me.

[WayneC]

There was also an RDC bug fix in the latest 1.411 software I dont know whether it is relevant to your situation