Author Topic: Fuel strip calibration succeded (?)  (Read 2980 times)


  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Fuel strip calibration succeded (?)
« on: September 02, 2014, 04:38:59 PM »
I've done the procedure according to  GS-911's instructions.
I left the strip to get dry for more than an hour. I didn't remove the outer shell of the strip.
I blew gently with air through the bottom hole.
Before the calibration and when the strip was inside the tank, the LCD panel was showing about 36km left.
After the calibration and as long as the strip was dry I was expecting to see 0km left and no bars at all at the LCD panel
Anyway I've done the calibration about 3 times with the same results. The program was showing that the procedure was succesful all the times.
Have I done anything wrong?