Adding DWA alarm to 2022 s100rr tft dash

[sfrider]

Hi there, I'm new to the gs-911 and I am trying to add the BMW DWA alarm module to my 2022 S1000RR.  I am able to use the gs-911 to make settings adjustments to the alarm, and the alarm seems to be working fine.  I am afraid I just don't see how to get the alarm to show up under vehicle settings in the TFT dash.

Any help there would be greatly appreciated!

[asellus]

did you perform the retrofit from the top level menu on the gs911?  I had a similar issue where I activated the specific module settings on my XR which seemed to partially activate it (it would beep 3 times instead of 2 upon arming).  turns out I didn't do the retrofit, which is an option specifically labeled as retrofit, which codes up the bike's delivery list to properly activate it.

[asellus]

it's under "service reminder/vehicle functions" and for my XR the menu looks like this:



clicking that alarm system button will let you run the retrofit, which will fully activate the alarm functions.

[sfrider]

Thank you!  That was exactly what I needed to do!

[phantom044]

A few months ago, while trying to activate the R1250 GS DWA alarm with GS911, I crashed the TFT screen. I went to the authorized service and there the TFT screen software was loaded again. Adding an alarm is a problem in itself. You should be careful.

[sfrider]

I hope that kind of thing does't happen often!

So Now the alarm shows up in the tft/dash, but changing the settings there does not seem to have any affect on the alarm.  For example using the dash setting to dissable auto-arming has no effect.  Is there another step that needs to be done to get the dwa alarm to actually follow the settings in the dash?

[sfrider]

Looks like one needs to enable the DWA controller to accept inputs from CAN, then it will listen to the Dash.