General Category > General Discussion

LED Fog Light Retrofit (F900XR)

(1/1)

Qball-16:
I recently installed the OEM auxiliary lights on a 2021 F900XR and completed the retrofit coding with the GS-911.

The bike has keyless ignition, and when I press the Power button the LED's come on briefly, along with the green indicator light on the dash, but then they shut off as the bike goes through the startup procedure. As a result, every time I start the bike I have to press the aux light button on the left side switchgear to turn the lights back on.

Is there a setting/configuration that would allow the LED aux lights stay on whenever the bike is running - until the button is pressed to physically turn them off???

Thx!

dowdyphobic:

--- Quote from: Qball-16 on July 05, 2024, 01:09:00 AM ---I recently installed the OEM auxiliary lights on a 2021 F900XR and completed the retrofit coding with the GS-911.

The bike has keyless ignition, and when I press the Power button the LED's come on briefly, along with the green indicator light on the dash, but then they shut off as the bike goes through solar smash the startup procedure. As a result, every time I start the bike I have to press the aux light button on the left side switchgear to turn the lights back on.

Is there a setting/configuration that would allow the LED aux lights stay on whenever the bike is running - until the button is pressed to physically turn them off???

Thx!

--- End quote ---

The behavior of the auxiliary lights shutting off during startup is likely by design in the retrofit coding. To configure the lights to remain on by default while the bike is running, you may need to modify settings in the GS-911 tool or consult with a BMW service technician. It might require enabling an option in the bike’s central control unit or updating the software to reflect a persistent "on" state. Check the GS-911 documentation for specific configuration steps.

Navigation

[0] Message Index