General Category > How do I...

April 2024 Software release regarding Rear Light control

(1/1)

John-G:

Hi,
Having just installed the new April 2024 software update for the GS911, I have been working through getting the central rear Brake Light to remain on and also act as a rear Marker Light.

My 2021 1250GS is fitted with the original full Weiser Technik Indicator replacement set that I'm very pleased to have, rather than the previously fitted BMW system.

If you also have the full Weiser set up, then just to let you know that for the central rear Marker Light to have a similar intensity to the normal Marker intensity of the Weiser Indicator / Marker / Brake lights I had to set the central Marker Light intensity to 50% rather than the GS911 suggested 10%. Not doing this made it appear as though the outboard Marker Lights had stuck in the Brake Light intensity.

Ruan:
Hi John

Thank you for the details provided. Can you confirm whether the center light is the stock BMW light or a Weiser light?

From our experience, Weiser lights do not handle dimming well, they prefer either off or 100% output.

Kind regards
Ruan

John-G:

Hi Ruan,

Thanks for your reply, yes I can confirm that my GS is still fitted with the standard BMW central rear Brake Light and that I had no problems adjusting the brightness of it.

(P.S. Nothing to do with this Post but have you any comments regarding my other Post asking if there is any possibility of an upgrade so that we can adjust the release point of the rear Brake when using Hill Hold Control?)

Thanks and regards,

John.

Navigation

[0] Message Index