Author Topic: Negative / minus engine load readings  (Read 3715 times)

Chris.S

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-0
Negative / minus engine load readings
« on: May 04, 2020, 09:09:24 AM »
 I have been getting negative / minus -  engine load readings above 30% throttle on twin cams and 50% throttle on hexheads.
 The readings rise as expected then carry on increasing but negative readings.
 This is with several different bikes and 2 GS911 units,
 I don`t remember this in the past is it a bug in the software updates.
 It came to light when doing full throttle run trying to sort another problem.

Chris.S

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-0
Re: Negative / minus engine load readings
« Reply #1 on: May 23, 2020, 06:18:39 PM »
 Still waiting for the Hexcode development team to come back with an answer on this.
  They have been very helpful and I have sent them the information that they require so when the answers emerge I will post them on here.

Chris.S

  • Newbie
  • *
  • Posts: 18
  • Karma: +0/-0
Re: Negative / minus engine load readings
« Reply #2 on: July 23, 2020, 06:15:06 PM »
 I still have not heard anything from Hexcode, but after downloading the latest software V2004.3  there are no more negative engine load readings.
  Just done a full throttle run and it recorded up to 68% engine load without a -ve reading on the .CSV file, so looks like they have fixed it.  :)