Author Topic: Error codes after service  (Read 118 times)

Kortgat

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Error codes after service
« on: September 09, 2018, 06:12:35 PM »
Hi  All,

I received three error codes on my XBCO module after my R1200GS LC (2013) was recently serviced. The dealer said they didn't see any codes. Firmware for various modules were updated. The error codes are all present and cannot be cleared:

E5942C: CAN message from SEB timeout (Sensorbox_ID1_Motorrad_2010)
E5942E: CAN message from SEB timeout (Sensorbox_ID4_Motorrad_2010)
E59468: No description for this fault code, please contact support@hexcode.co.za

There are not other codes reported, and I cannot see any bad symptoms.

Any advice would be greatly appreciated.


Mornay

  • Administrator
  • Jr. Member
  • *****
  • Posts: 80
  • Karma: +2/-0
Re: Error codes after service
« Reply #1 on: September 10, 2018, 08:47:10 AM »
Hi,

Send us an email to our helpdesk and we'll get you that missing fault code:

http://www.hexcode.co.za/contact-us-1

Kortgat

  • Newbie
  • *
  • Posts: 3
  • Karma: +0/-0
Re: Error codes after service
« Reply #2 on: September 10, 2018, 08:10:01 PM »
Thanks, will do.