Author Topic: Fault codes 0x21F761; 0x80401D; 0x80402B, any help please  (Read 2609 times)

JayElDee

  • Newbie
  • *
  • Posts: 4
  • Karma: +0/-0
Fault codes 0x21F761; 0x80401D; 0x80402B, any help please
« on: November 18, 2016, 09:05:39 PM »
Hi, for the first time, during the 18k miles service, I saw 3 fault codes on my 2016 r1200gs.
21F761 Oil Level sensor, level too low
80401D Tank switch error
80402B Precondition for locking not fulfilled
none were present at the time of running the diagnostics.
I have since cleared them, rerun autoscan and no fault codes are reported

this is the autoscan report:

AutoScan Report
GS-911 version: 1609.1 Datapack version: 6.1
Serial Number: GS1 003 650
Firmware version: 0.246-0.137 Datapack version: 0.124
Registered to: John L. xxxxxxxxxxxxx
Date: 11/17/2016 Time: 10:23:14 PM
Motorcycle Information
VIN: WB10A1109GZ189820
Mileage: 17430.9 miles
Cluster date: 17 November 2016
Next service date: 02 August 2017
Next service distance: 17431 miles
Factory I-Level: K001-15-07-510
Actual I-Level: K001-15-07-510
XSLZ
Controller:   0F8600
Serial Number:   
Manufacture Date (YY/MM/DD):   15/09/10
Program Count:   0
Program Count Maximum:   1024
Firmware Date (YY/MM/DD):   99/99/99
Number of FW configurations:   4
HW Electronics (HWEL):   
   Firmware ID:   0BFA
   Firmware Version:   003.001.000
Bootloader (BTLD):   
   Firmware ID:   0BFB
   Firmware Version:   003.001.003
SW Memory Image (SWFL):   
   Firmware ID:   0BFD
   Firmware Version:   003.005.006
Coding Data (CAFD):   
   Firmware ID:   0BFC
   Firmware Version:   001.000.007


2 fault codes found:

80401D   Tank switch error
The fault is not present now.
80402B   Preconditions for locking not fulfilled
The fault is not present now.
XSAF
Controller:   0F8500
Serial Number:   0000247396
Manufacturer:   Temic
Manufacture Date (YY/MM/DD):   15/09/28
Program Count:   0
Program Count Maximum:   1024
Firmware Date (YY/MM/DD):   15/09/28
Number of FW configurations:   5
HW Electronics (HWEL):   
   Firmware ID:   1014
   Firmware Version:   001.000.001
Bootloader (BTLD):   
   Firmware ID:   1013
   Firmware Version:   001.001.002
SW Memory Image (SWFL):   
   Firmware ID:   1015
   Firmware Version:   001.017.002
SW Memory Image (SWFL):   
   Firmware ID:   117D
   Firmware Version:   001.017.002
Coding Data (CAFD):   
   Firmware ID:   1016
   Firmware Version:   001.015.006


No fault codes found
XBCO
Controller:   0F8A10
Serial Number:   4720034192
Manufacture Date (YY/MM/DD):   15/10/05
Program Count:   0
Program Count Maximum:   1024
Firmware Date (YY/MM/DD):   15/10/05
Number of FW configurations:   4
HW Electronics (HWEL):   
   Firmware ID:   2A58
   Firmware Version:   001.005.001
Bootloader (BTLD):   
   Firmware ID:   2A55
   Firmware Version:   002.000.000
SW Memory Image (SWFL):   
   Firmware ID:   2A56
   Firmware Version:   001.022.002
Coding Data (CAFD):   
   Firmware ID:   2A57
   Firmware Version:   001.001.037


No fault codes found
XKOMBI50
Controller:   0F8850
Manufacturer:   Continental Automotive
Manufacture Date (YY/MM/DD):   15/09/29
Program Count:   0
Program Count Maximum:   1024
Firmware Date (YY/MM/DD):   15/09/28
Number of FW configurations:   5
HW Electronics (HWEL):   
   Firmware ID:   124E
   Firmware Version:   000.002.000
Hardware Type (HWAP):   
   Firmware ID:   1A1C
   Firmware Version:   255.255.255
Bootloader (BTLD):   
   Firmware ID:   124D
   Firmware Version:   000.003.001
SW Memory Image (SWFL):   
   Firmware ID:   1250
   Firmware Version:   000.003.042
Coding Data (CAFD):   
   Firmware ID:   124F
   Firmware Version:   000.005.013


No fault codes found
XRDC
Controller:   0F8100
Serial Number:   2381501193
Manufacturer:   Schrader
Manufacture Date (YY/MM/DD):   15/08/26
Program Count:   0
Program Count Maximum:   1024
Firmware Date (YY/MM/DD):   99/99/99
Number of FW configurations:   4
HW Electronics (HWEL):   
   Firmware ID:   0B49
   Firmware Version:   000.001.008
Bootloader (BTLD):   
   Firmware ID:   0CB1
   Firmware Version:   000.002.025
SW Memory Image (SWFL):   
   Firmware ID:   0CB2
   Firmware Version:   001.000.070
Coding Data (CAFD):   
   Firmware ID:   0B4B
   Firmware Version:   000.005.000


No fault codes found
XABS
Controller:   0F8300
Serial Number:   6283900893
Manufacturer:   Continental Automotive
Manufacture Date (YY/MM/DD):   15/09/24
Program Count:   0
Program Count Maximum:   1000
Firmware Date (YY/MM/DD):   15/09/24
Number of FW configurations:   3
HW Electronics (HWEL):   
   Firmware ID:   1299
   Firmware Version:   000.003.000
Bootloader (BTLD):   
   Firmware ID:   1298
   Firmware Version:   000.002.000
SW Memory Image (SWFL):   
   Firmware ID:   129A
   Firmware Version:   003.002.005


No fault codes found
BMSX
Controller:   0F8B00
Serial Number:   0170236526
Manufacture Date (YY/MM/DD):   15/09/25
Program Count:   1
Program Count Maximum:   60
Factory I-Level:   K001-15-07-510
Actual I-Level:   K001-15-07-510
Firmware Date (YY/MM/DD):   15/11/03
Number of FW configurations:   5
HW Electronics (HWEL):   
   Firmware ID:   08A3
   Firmware Version:   004.000.000
Bootloader (BTLD):   
   Firmware ID:   0C49
   Firmware Version:   004.000.000
SW Memory Image (SWFL):   
   Firmware ID:   0CF7
   Firmware Version:   022.000.000
SW Memory Image (SWFL):   
   Firmware ID:   30EB
   Firmware Version:   022.000.000
Coding Data (CAFD):   
   Firmware ID:   08A2
   Firmware Version:   000.008.009
VIN model year:   2016


1 fault codes found:

21F761   Oil-level sensor, level too low
The fault is not present now.
___
Don't know if this has anything to do with it, but on the oil level fault, the oil level display on the dash has always been a bit finicky to display, but always showed "OK" or "---". Just before reading the fault codes during the service,  I drained the oil, and did turn on the ignition (but not the engine) while the oil was drained, ie, before refilling it.

Any insight appreciated

tia
John
« Last Edit: April 15, 2020, 04:04:25 PM by Peet Badenhorst »