Author Topic: GS-911 won't talk back to the computer  (Read 7610 times)

Houdini

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
GS-911 won't talk back to the computer
« on: October 06, 2016, 06:18:54 AM »
To the worldly and knowledgeable,
I've only had my GS-911 for a few months and used it only a couple times on my Windows laptop. In all usage sessions, connection has been very unreliable even though the WiFi router is only two metres away from the GS-911 and the laptop. I have also tried using it on my Home PC with no better results.

TODAY I CANNOT GET THE GS-911 FUNCTIONING.

I can get a response "beep" and the WiFi test shows okay.
When plugged into the bike I press "identify (beep) device" it beeps and then I get the message "Failed to send identity command".
Also, when I try to select a bike from the list, a message "Please connect a GS-911 interface to use the diagnostic function" appears.

I have reset the Wifi settings several times for the unit and repeated all the standard setup procedures with no improvement.

I hope someone can direct me to a solution to solve this.
« Last Edit: October 06, 2016, 08:26:49 AM by Houdini »
Past: 1955 Norton ES-2, 1972 Norton 750 Commando Long Range Fastback, 1977 Honda 350XLE, 2001 R1150RT (written off), 2005 R1150RT, 2004 R1150GS, 2001 F650GS.
Current: 2013 R1200GS LC

mike d

  • Full Member
  • ***
  • Posts: 133
  • Karma: +3/-0
Re: GS-911 won't talk back to the computer
« Reply #1 on: October 06, 2016, 09:56:57 AM »
If you have a windows laptop, have you tried direct connection via the USB cable. At least then you could rule out  the WiFi.

Mike

Houdini

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: GS-911 won't talk back to the computer
« Reply #2 on: October 06, 2016, 11:24:04 AM »
mike d,
I've tried direct connection with the USB and there is still no response. All indications show that it is connected but the response from the GS-911 program is "Please connect a GS-911 interface to use the diagnostic function".
Past: 1955 Norton ES-2, 1972 Norton 750 Commando Long Range Fastback, 1977 Honda 350XLE, 2001 R1150RT (written off), 2005 R1150RT, 2004 R1150GS, 2001 F650GS.
Current: 2013 R1200GS LC

Xchallenge

  • Jr. Member
  • **
  • Posts: 69
  • Karma: +1/-0
Re: GS-911 won't talk back to the computer
« Reply #3 on: October 06, 2016, 02:48:21 PM »
What happens when you go to Tools, Setup, select USB and then push the Test interface-button?

Houdini

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: GS-911 won't talk back to the computer
« Reply #4 on: October 06, 2016, 11:19:42 PM »
What happens when you go to Tools, Setup, select USB and then push the Test interface-button?

I think I might have already tried this. I became so frustrated yesterday that I lost my normal composure and methodical approach. My bike is out of action until tomorrow but I will check out your suggestion as soon as I can.
Thank you for your input.
Past: 1955 Norton ES-2, 1972 Norton 750 Commando Long Range Fastback, 1977 Honda 350XLE, 2001 R1150RT (written off), 2005 R1150RT, 2004 R1150GS, 2001 F650GS.
Current: 2013 R1200GS LC

Houdini

  • Newbie
  • *
  • Posts: 9
  • Karma: +0/-0
Re: GS-911 won't talk back to the computer
« Reply #5 on: October 08, 2016, 05:18:07 AM »
Some help from Wayne C allowed me to sort out some IP address conflicts and the issue is now resolved. ;D
Past: 1955 Norton ES-2, 1972 Norton 750 Commando Long Range Fastback, 1977 Honda 350XLE, 2001 R1150RT (written off), 2005 R1150RT, 2004 R1150GS, 2001 F650GS.
Current: 2013 R1200GS LC