Author Topic: The problem with ABS pump -"pressure transducer sensors" / (BMW K1200S, 2005)  (Read 2771 times)

Tunder

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Hello everyone  ;)

I have the problem with my ABS pump -  exactly with "pressure transducer/sensors" ?
I was talking with some BMW specialist and he told me that is broken one of these sensors, but i don't know which one!?
There are two pressure transducers- one with short cable and black plug, the second with a long cable and the white plug.

I ask because the diagnostic program shows me "the pressure is too high in rear brake - about 130Bar, and the rest of sensors have about 20 bar.

I have the second pump to parts and I would like to replace the appropriate sensor without dismantling the entire pump.

Maybe there is a way to measure sensors of measuring device?


Could you help me please?

Arek

« Last Edit: August 25, 2016, 01:07:23 PM by Tunder »

r1100s

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0

Did you resolve the problem ??

There is two pair of sensors: control pair at the electronic side and wheel pair at the oposite side.

Esch pair is for front and rear brakes.

As I known, it is not possible to repair them.

Hope being helpfull.

Enviado desde mi Samsung utilizando Tapatalk...
« Last Edit: September 14, 2016, 04:23:21 PM by r1100s »

Tunder

  • Newbie
  • *
  • Posts: 2
  • Karma: +0/-0
Yes,
I fixed it. I replaced the modulator and is now fine.

Thx.

Jughead

  • Beta testers
  • Hero Member
  • *
  • Posts: 661
  • Karma: +42/-2
    • Dual Sport Motorcycle Clinic
Yes,
I fixed it. I replaced the modulator and is now fine.

Thx.

"Modulator"??

Did you replace the entire pump?