General Category > How do I...

Error Messages

<< < (5/5)

WayneC:
No, not at all

I went back and took a look at the settings in the latest version of the PC App and I was wrong, you were right the IP capability is there, shows how long it is since I looked at the settings in the PC App.

I had an ECU on the test bench for testing/repair so I used PC App on IP for the testing and it works but I dont like the delay in real time values IP gives as per other similar diagnostics systems which operate over TCP/IP. I did not bother with the search to configure the IP No I simply entered it into the PC App config.

I then moved the GS911 onto a main more loaded network I have so the PC App operated to the GS911 through a gateway and it worked but the more loaded network does have an effect on real time data with some delays and running a few big downloads through the main link while also doing diags generated some time outs etc which does not surprise me and I would not adopt it for normal operation and testing

Since you proved the USB PC App operated error free and using the web interface operated error free your GS911 is fine, there is no problem with it
and any errors you have will be associated with router configuration

The one thing I did not have time to investigate is whether changing from USB to IP config using the WiFi utility changes the PC App config to IP, that would have involved in pulling out another PC which time has simply not permitted

Navigation

[0] Message Index

[*] Previous page