Author Topic: 304: Oxygen (Lambda) Sensor Circuit Malfunction  (Read 3765 times)

MotEng

  • Newbie
  • *
  • Posts: 5
  • Karma: +0/-0
304: Oxygen (Lambda) Sensor Circuit Malfunction
« on: November 17, 2021, 02:30:19 PM »
Hello all, while i was riding my bike started to misfire, on a stop noticed very rough idle. Plugged the GS911 and had the following error:304: Oxygen (Lambda) Sensor Circuit Malfunction!
Plotted the O2 sensor and noticed the flat line way under the minimum voltage!!! Replaced it with a new Bosch O2 sensor same error! Any of you came up with a wiring harness problem?
There is low voltage for sure but i cannot trace an earth short circuit! 

GS Jim

  • Full Member
  • ***
  • Posts: 223
  • Karma: +9/-0
Re: 304: Oxygen (Lambda) Sensor Circuit Malfunction
« Reply #1 on: November 17, 2021, 06:20:48 PM »
I think for anyone to help you you will have to post a minimum of information such as year and model and maybe the scan itself.

schuppi

  • Hero Member
  • *****
  • Posts: 552
  • Karma: +21/-0
Re: 304: Oxygen (Lambda) Sensor Circuit Malfunction
« Reply #2 on: November 17, 2021, 08:24:52 PM »
Hello

If a measured lambda sensor voltage is smaller 0.1V , the engine is running extremely lean.
This also explains the poor running behavior.

Please check engine and intake system for leaks. 8)
Schönen Tag
Wolfgang
                                       talk less, drive more